"I know, I know," you say another reader, after reading the title. - Yes, but no "live" or "dead" water does not happen. Tales!.. Is he right?
A few years ago the magazine "Inventor and rationalizer" reported that we developed a device that allows you to do "live" and "dead" water. But if to speak the language of chemists, water with a very strong acid and alkaline reaction. It turned out ordinary water can be decomposed as into two components with completely opposite properties. According to many who experienced their actions, "living" water has a beneficial effect on the complexion, softens wrinkles, improves hair growth, reduces hair loss, is a good tool from burns. But the "dead" water works well on the oral cavity, reduces bleeding from gums.
There is evidence that "living" water can be successfully used for watering flowers, vegetables, berry and fruit crops. Its effect is poorly understood, but even those are scarce the results already obtained, speak volumes. Noticed that it moistened seeds germinate early, the plants grow better and yield higher.
We offer you guys to experiment based on what we have.
Where to start? Let's understand the mechanism for obtaining these waters. In Fig. 1 is a schematic diagram of the device.
Fig. 1
In the vessel 1 is immersed two electrodes 2 and 3. Moreover, the electrode 3 is placed in an electrically permeable receptacle 5. Through the diode electrodes 4 are connected to an electrical AC network voltage 220 V. What happens to the water it is easy to see. It goes the electrolysis. Around one electrode, water is saturated with ions of the hydroxyl group, around the other hydrogen ions. So they don't mix and neutralized each other, and just need an internal electrically permeable receptacle 5. It volume should be about one-fifth of the vessel 1. When a current in the vessel 5 is obtained by "living" water, and the rest of the water is "dead".
Now, let's talk about the instrument itself. It consists of a one-liter glass jars, two aluminium plate electrodes, inner vessel made of tarpaulin, diode D226 and supply of insulated wires. Assemble it as shown in Fig. 2. Please note that the device is included in a network, and the voltage is 220 In danger!
Fig. 2
In fifteen minutes the unit will shut down. Water bottle for individual vessels.
Their action on plants capture in the diaries.
Author: N. Victor