It happens that in the distributor nothing to replace the worn runner. Then can be soldered brass strip on chocolateboy plate. However, it is difficult to withstand the basic size. If the strip will be shorter, it "receives" the whole the effect of rehabilitation works, and if longer - plate will cling contacts cover.
Repair tokoroten plate: 1 - extra plate; 2 - regular Tokorozawa plate; 3 - housing runner
To determine this size, we must still repair to stick a piece of plasticine at the end of the regular tokoroten plate and setting the distributor cap on place, turn the crankshaft. The excess clay will be cut off contacts, that will enable us to accurately measure "a".
Author: V. Zhuk