The pacemaker is designed to control and normalize body functions by influencing the biologically active areas of the skin a mild electric current a special form with the control of these points in the treatment process.
The pacemaker is used in prevention and treatment at home, after consultation with physician and in compliance with all of its recommendations.
Powered pacemaker is running on battery type "Corundum" or accumulator-0,115-U1,1.
The pacemaker consists of a generator on the elements DD1.1 and DD1.2, a sound emitter HA1 and light VD5. The impact on the active points is performed using remote electrodes included in the diagonal of the diode bridge VD1...VD4.
It is known that the resistance of the skin areas where active points close to the surface, little in comparison with the other areas. This effect is used in the pacemaker. In the initial state (with power on), generator, assembled on the elements DD1.1 and DD1.2, does not work, but if between the electrodes, there is a finite resistance, the generator starts to produce pulses. Indicators HA1, VD5 this point. The frequency of the generated oscillations, the higher the lower the resistance between the electrodes. Consequently, the procedure of finding biologically active sites is to find a point on the skin when the emitter 1 emits the highest sound.
Diode bridge VD1 ...VD4 is necessary in order to form pulses of exposure to a certain polarity. Experts recommend to affect the active point usually the "negative" electrode. The "positive" electrode is considered common, and can be placed in the hand or in the location specified by a physician. Your doctor may recommend other options.
Chip CLA can be replaced by CLA. Diodes KDB replaced any of the series CD, KD521. Led ALB may be with a different letter. The emitter 1 is replaced by UR1; UR2; SP; SP.
Author: M. Capucci, Sverdlovsk region, city of Kachkanar; Publication: N. Bolshakov, rf.atnn.ru