The water treated with electric shocks, new property: a part of it manifests itself as a weak alkali solution, and the other acid. When activated thus the water tested on animals and plants, it turned out what liquid with alkaline properties were biostimulant, but one that is signs of acid inhibits the growth of microorganisms and cells of living tissues.
A schematic diagram of the apparatus for electrolysis of water
A device for water activation is valid so.
In the water tank are two electrodes, between them set partition of canvas or cellophane. When the plates are served high DC the tension in the vessel electrolysis occurs. After separation of gases liquid at the cathode has an excess of Oh-groups - has alkaline properties. At the anode is formed an excess of ions N in this zone, the water becomes acidic properties. Mixing the contents of the tank prevents the diaphragm partition, missing only a weak current generated due to the ion drift.
The rectifier is assembled in a bridge circuit on eight power diodes DA (V1-V8). Parallel connected resistors R1-R8 for alignment of throws reverse voltage. Diode V9 reduces the ripple current in the circuit of the electrodes. Control mode electrolysis is carried out using ammeter PA1 M2001 3 A and voltmeter РV1 M2001 to 600 V. Switch S1 sets the value of the the voltage on the electrodes, and the lamp 6.3 V, N1 serves as an indicator of inclusion device.
The high voltage source is a step-up transformer with windings on 250, 500 and 750, are designed for currents up to 0.6 A.
The case of our device is the size of HH mm made of sheet Plexiglas.
External view of the device for activation of water
Vinyl plastic tank has two taps to drain the acid and alkaline water. Electrodes size h mm made of alloy HT.