Chizhevsky chandelier repeatedly been described in various publications. Your attention an efficient supply circuitry Chizhevsky, which is depicted in Fig. 4.62.
The transformer T1 is made of old line transformer FA-110. The primary winding is removed and wound turns 70 wire PEL, sew with a diameter of 0.5 to 0.8 mm. Capacitors C1, C2 - MBM, K73-17 operating voltage not less than 250 V; C3 - WOPS (operating voltage 15 kV); Thyristors VS1 - COA, COOK...KUN. Resistors R1 and R4 are selected when configuring ionizer under the type of emitter and premises (as R4 can use construction). The main advantage of this power source ionizer - the use of television multiplier ON/27. Looking at the chart UN/27, we can see that to use as a multiplier negative voltages it is necessary to include "Vice versa". But this requires to get to point A. the Experiment is best spent on a faulty the multiplier is disassembled (smashing), and to find the connection point. After this new multiplier should be carefully incised or drill "fill" until proper contact with the required conductor soldered to it a piece of the high voltage wire and insulated with epoxy glue the soldering.
Unused pins of the multiplier must also be insulated. The input of a multiplier points "A" and "b"; exit point of the "V" and "body". They are connected together and through resistor MLT-2 resistance of 10...20 Mω is connected to the emitter.
Ionizer, assembled according to the proposed scheme, passed a one-year test and proved its high efficiency and beneficial effects on the human body. This ionizer is operated with wire emitter of nichrome wire with a diameter of 0.15 mm, stretched around the perimeter of the room at a distance of not less than half a meter from the walls and ceiling.
Author: A. P. Seman